隨著房地產業的發展，小型混凝土攪拌車越來越普及。它已成為工地上一道亮麗的風景線，但是小型混凝土攪拌車的專業知識還不夠，這是一個很大的問題，所以這裏小編會為你解決這個問題，帶你
With the development of the real estate industry, small concrete mixer is becoming more and more popular. It has become a beautiful scenic spot on the construction site, but the professional knowledge of small concrete mixer truck is not enough, which is a big problem, so the small editor here will solve this problem for you and take you
去了解小型混凝土攪拌車。
To learn about small concrete mixers.
攪拌車底盤是支撐整車重量的主要部件，由發動機、底盤、駕駛室和電氣設備組成。
Mixer truck chassis is the main component supporting the weight of the whole vehicle, which is composed of engine, chassis, cab and electrical equipment.
發動機為整車提供足夠的動力。小型混凝土攪拌車裝滿混凝土後能否運轉取決於發動機。因此，在選擇小型混凝土攪拌車時，必須選擇發動機質量好、功率充足的攪拌機。當然，這並不意味著權力越大越好。kaiyun應該根據混合罐的容積來選擇，這是重要的，選擇是經濟的；
The engine provides sufficient power for the whole vehicle. Whether the small concrete mixer can run after it is filled with concrete depends on the engine. Therefore, when selecting a small concrete mixer, the mixer with good engine quality and sufficient power must be selected. Of course, this does not mean that the greater the power, the better. We should choose according to the volume of the mixing tank, which is important and economical;
底盤應該用料好，重量輕，這樣可以支撐整個混合罐的重量；
The chassis shall be made of good materials and light in weight, so as to support the weight of the whole mixing tank;
駕駛室應該盡量大一些，舒適一些，因為混凝土攪拌車的司機也很辛苦，在車上花了很多時間；
The cab should be as large and comfortable as possible, because the driver of the concrete mixer truck is also very hard and spends a lot of time on the truck;
電器設備應該是類似的，雖然不是硬件設備，但也是不可缺少的，所以平時要注意做好保養，從而達到事半功倍的效果，延長其使用壽命。
Electrical equipment should be similar. Although it is not hardware equipment, it is also indispensable. Therefore, attention should be paid to maintenance at ordinary times, so as to achieve twice the result with half the effort and prolong its service life.
所謂頂裝，就是攪拌槽及其部件。
The so-called top loading refers to the mixing tank and its components.
攪拌槽一般為梨形結構，其材質應為高強度碳鋼，葉片是攪拌槽內攪拌混凝土的一部分，葉片加厚采用雙螺旋對數，以保證攪拌均勻；
The mixing tank is generally pear shaped structure, and its material shall be high-strength carbon steel. The blade is a part of the mixing concrete in the mixing tank. The double helix logarithm is adopted for blade thickening to ensure uniform mixing;
罐上設有上下料裝置，由上料鬥、下料鬥、主出料罐、副出料罐、支架、鎖緊架等組成，料鬥從攪拌站接收混凝土並輸送至攪拌罐。
The tank is equipped with a loading and unloading device, which is composed of an upper hopper, a lower hopper, a main discharge tank, an auxiliary discharge tank, a support, a locking frame, etc. the hopper receives concrete from the mixing plant and transports it to the mixing tank.
從小型混凝土攪拌車卸料口攪拌槽卸下的混凝土輸送至泵送裝置，終到達施工現場指定位置。如每次混凝土運輸時，應及時清理出料口、進料口和罐內。否則，混凝土會越來越多地粘在上麵，從而損壞這些部位，減少罐體體積，增加罐體重量，終降低攪拌車的使用壽命。
The concrete unloaded from the mixing tank at the discharge port of the small concrete mixer is transported to the pumping device and finally arrives at the designated position on the construction site. If the concrete is transported each time, the outlet, inlet and tank shall be cleaned in time. Otherwise, the concrete will stick more and more on it, thus damaging these parts, reducing the volume of the tank, increasing the weight of the tank, and finally reducing the service life of the mixer.
以上便是問題的相關解答內容了，如果您想獲取更多相關信息，就來關注kaiyun網站http://www.skar-bnat.com吧！
The above is the relevant answers to the questions. If you want to get more relevant information, please follow our website http://www.skar-bnat.com Come on!
