大家都知道刹車係統對於一台車輛的重要性，對於普通車輛尚且如此對於專用於全自動混凝土攪拌車來說就更是如此了，那麽kaiyun應該怎樣維護和解決攪拌車配件刹車故障呢？
Everyone knows the importance of the brake system for a vehicle, even for ordinary vehicles, especially for fully automatic concrete mixers. How should we maintain and solve the brake failure of mixer parts?
造成刹車失靈的原因很多，小編簡單的將它進行了以下歸類：
There are many reasons for brake failure. Xiao Bian simply classifies it as follows:
平時檢修不夠導致的攪拌車刹車失靈平時對刹車係統缺乏保養，到關鍵需要它的時候，它很有可能罷工，從而釀成大禍。
The brake failure of the mixer caused by insufficient maintenance usually lacks maintenance for the brake system. When it is critical to use it, it is likely to strike, causing a disaster.
處理辦法：經常檢查刹車總泵、刹車分泵、儲氣筒和管線是否工作良好。出現漏氣和工作狀態不佳的應該立刻修複或者更換，平時行車中應該時刻注意儀表上氣壓的變化。
Treatment method: frequently check whether the brake master cylinder, brake wheel cylinder, air reservoir and pipeline are in good condition. In case of air leakage and poor working condition, repair or replace them immediately, and pay attention to the change of air pressure on the instrument during normal driving.
不合理的操作方法導致機件失靈
Unreasonable operation method leads to failure of parts
由於司機自身缺乏駕駛經驗，錯誤的操作攪拌車導致機件失靈。
Due to the driver's lack of driving experience, the wrong operation of the mixer led to the failure of parts.
解決辦法：下長坡時，掛低檔降低車速，利用發動機對車速進行牽製，盡量少用刹車防止刹車片過熱，踩刹車時用點刹而不要用“一腳悶”的方法。
Solution: When going down a long slope, shift to a low gear to reduce the speed, use the engine to restrain the speed, use the brake as little as possible to prevent the brake pads from overheating, and use the brake tap instead of the "one foot stuffy" method when stepping on the brake.
嚴重超載，致使刹車失靈
Severe overload, resulting in brake failure
嚴重超載，攪拌車的總質量增加，在重力加速度的作用下，加大了車輛運動慣性，直接導致刹車失靈。
Serious overloading increases the total mass of the mixer truck. Under the effect of gravity acceleration, the inertia of vehicle motion is increased, which directly leads to brake failure.
解決辦法：超載車輛由於增加了車輛的總質量，從而增加了車輛的運動慣性，在駕駛超載車輛時，一定要慢，不可為了趕時間而不顧生命安全。
Solution: Overloaded vehicles increase the total mass of the vehicle, thus increasing the inertia of the vehicle. When driving overloaded vehicles, you must be slow. Don't rush for time and disregard your life safety.
合理的選擇輔助製動，讓行車更加安全
Reasonable selection of auxiliary braking makes driving safer
排氣製動已經成為大多數載貨車輛上的標配，行車中應該配合使用。另外，kaiyun還可以選擇其他的輔助製動(例如發動機製動、緩速器等)，讓kaiyun的行車變的更加安全。
Exhaust brake has become the standard on most trucks, and should be used together during driving. In addition, we can also choose other auxiliary braking (such as engine braking, retarder, etc.) to make our driving safer.
以上kaiyun就給大家介紹一下具體的內容，希望對有此類問題的攪拌車司機有所幫助。關注kaiyunhttp://www.skar-bnat.com，了解更多事項！
We will introduce the specific content above, and hope it will be helpful to the mixer drivers with such problems. Follow us http://www.skar-bnat.com , learn more!
