1. High efficiency: such as automatic loading mixer, the discharge volume is about 20 cubic meters per hour, and about 500 tons of concrete a day. However, if it is manual mixing, the concrete that can be stirred in one hour is limited. Even if it is a mixer, its efficiency is much worse than that of an automatic feeding mixer.
2. Strong practicability: no matter it is to build roads, bridges and houses, or to hit the ground, slope protection and foundation, the automatic feeding mixer can be used. As long as it is the need for concrete engineering, its practicality is as high as 100%. In addition, most of the projects are located in mountainous areas, and some are even in plateau grassland. The automatic feeding mixer can adapt well, with strong power, small torque, four-wheel steering, two-way driving and other characteristics.
3. High automation program: automatic loading, mixing, unloading, transportation, production of concrete is not laborious.
4. Labor saving: 1-2 people can operate, one person can operate, one assistant operation.
5. Cost saving: in addition to the above can save labor costs, but also can save a lot of material costs. After all, the current commercial concrete price is not low, C30 concrete side is around 300 yuan (there are differences in prices in different places).
6. High safety: because the rear weight is too large, the traditional mixer truck climbing has a great potential safety hazard. The design of the body structure and counterweight of the automatic feeding mixer is reasonable, the walking is stable and the safety factor is high.
1. The volume of automatic feeding mixer is not very large. Now on the market of automatic feeding mixer, the maximum volume of mixing tank is 4 cubic meters, so it is more suitable for small and medium-sized projects.
2. Wear and tear. The main reason is that the mixing tank and the bottom tray of the automatic feeding mixer are greatly worn. Because of the high frequency and intensity of operation, the mixing tank of the self loading mixer needs to rotate from time to time, which causes the friction problem between the mixing tank and the tray.
3. Long distance transportation is not allowed. The speed of the automatic loading mixer is limited. It only supports short-distance transportation and does not support long-distance transportation. If the distance between the two projects of the automatic loading mixer is far, the logistics truck is required to transport the automatic loading mixer to the next project.
Generally speaking, the advantages of the self loading mixer are really excellent, and the disadvantages are also real. However, compared with the relatively common disadvantages such as small volume and no support for long-distance transportation, the large wear of the mixing tank and the impact on the service life of the mixer can be avoided to the greatest extent. Users need to choose the mixer truck from a regular large factory,
The above is the automatic feeding mixer shared by Xiaobian. What new and interesting knowledge have you seen? , welcome to click on the website link http://www.skar-bnat.com/ Write down what you want to say in the message