For the scratches caused by friction on the concrete mixer truck, we can apply the coating agent on the truck, and the coating process should be even. More remedial measures will be explained in the following sections.
The way to deal with the scars on the bumper is to cut off the burrs, and apply putty on the potholes to make them smooth. Special putty, prepare all kinds of colors, and select the colors that are close to each other. The bumper painted in the same color as the body of the loader type concrete mixer is very important.
No matter what kind of concrete mixer truck, there will be large or small scars. If it is a less eye-catching wound, you can leave it alone; If the concrete mixer truck only scratches the surface paint shallowly, use the mixture to treat it immediately. The scrubbing method is linear scrubbing. After the scar disappears, scrub it with a thinner mixture and then wax it.
Very deep but long scars can be repaired well with colorful putty. Sand paper shall be used for the scar. Do not expand the scar surface at will. It is important to remove the dirt. Putty shall be applied carefully, which means it enters the interior thoroughly. Then apply the mixture and wax to finish the operation.
Deep scratches can be repaired with touch up paint. Use the tip of the pen to address it bit by bit, and then wait until the paint is completely dry.
Concavity treatment is one of the most troublesome tasks in car body maintenance. First of all, a good foundation should be laid. Be careful not to spread the paint around during painting.
Although the internal parts of the concrete mixer are very important, they must have a good appearance. Good paint maintenance can effectively extend the service life of the mixer and create greater value for users. Follow us http://www.skar-bnat.com Learn more!