在施工現場，混凝土攪拌車的攪拌係統是非常重要的一環，一車混凝土的好壞都與攪拌係統密切相關，對於很多不太熟悉攪拌車的人來說，先了解攪拌係統會讓kaiyun事半功倍。
At the construction site, the mixing system of the concrete mixer truck is a very important link. The quality of a truck of concrete is closely related to the mixing system. For many people who are not familiar with the mixer truck, knowing the mixing system first will make us get twice the result with half the effort.
其實小型混凝土攪拌車就應該由攪拌筒及其輔助支撐部件組成。攪拌車的攪拌筒是混凝土的裝載容器，它是由高質量的耐磨薄鋼板製成，為了能實現混凝土的自動裝卸，內壁焊有特殊形狀的螺旋葉片。
In fact, the small concrete mixer should be composed of the mixing drum and its auxiliary supporting parts. The mixing drum of the mixer truck is a concrete loading container, which is made of high-quality wear-resistant steel sheet. In order to realize the automatic loading and unloading of concrete, the inner wall is welded with spiral blades of special shape.
旋轉混凝土攪拌車時，混凝土沿著葉片的螺旋式方向運動，在連續的升降過程中進行攪拌。喂入和喂出時，攪拌筒正轉，混凝土沿葉片向內移動，出料時攪拌筒反轉，混凝土沿葉片向外卸出。攪拌器的旋轉由液壓傳動裝置來保證。
When the concrete mixer is rotated, the concrete moves along the spiral direction of the blade and is mixed in the continuous lifting process. During feeding and discharging, the mixing drum rotates forward, and the concrete moves inward along the blades. During discharging, the mixing drum reverses, and the concrete is discharged outward along the blades. The rotation of the agitator is ensured by the hydraulic transmission device.
加載3-6立方混凝土攪拌運輸車，一般由汽車發動車通過動力輸出軸帶動液壓泵，然後用高壓油驅動液壓馬達，攪拌筒。
3-6 cubic meters concrete mixer truck is loaded. Generally, the truck engine drives the hydraulic pump through the power output shaft, and then uses high-pressure oil to drive the hydraulic motor and the mixing drum.
當混合車裝載量為2-5立方時，由車載輔助柴油車帶動液壓泵驅動液壓馬達。刀片是攪拌車的主要部件，如果損壞或嚴重磨損，就會造成攪拌不均勻。此外，如果葉角設計不合理，還會使混凝土產生離析現象。
When the loading capacity of the hybrid vehicle is 2-5 cubic meters, the on-board auxiliary diesel vehicle drives the hydraulic pump to drive the hydraulic motor. The blade is the main part of the mixer truck. If it is damaged or severely worn, it will cause uneven mixing. In addition, if the design of blade angle is unreasonable, the concrete will be separated.
操縱係統是整個攪拌車的控製部件，操縱麵板上開有“工字形”槽，是操縱杆的活動空間；並且後半部的槽上開有限位孔，用來固定操縱杆的位置。該操縱係統通過汽車尾部的左右兩個操縱杆來控製攪拌筒的正、反轉和轉速，從而來完成進出料以及攪拌動作。
The control system is the control part of the whole mixer truck. The control panel is provided with an "I-shaped" slot, which is the active space of the control lever; And a limit hole is opened on the groove of the rear half to fix the position of the control lever. The control system controls the forward, reverse and rotational speed of the mixing drum through the left and right control levers at the rear of the vehicle, so as to complete the feeding and discharging and mixing actions.
混凝土攪拌車的供水係統主要用來清洗攪拌裝置。該車型的供水係統共有兩種型式，一種是離心水泵供水係統；一種是壓力水箱供水係統，可供用戶選裝。
The water supply system of the concrete mixer is mainly used to clean the mixing device. There are two types of water supply system for this vehicle, one is centrifugal water pump water supply system; One is the pressure water tank water supply system, which can be selected by users.
混凝土攪拌車在運輸過程中會始終保持攪拌筒轉動，以保證所運載的混凝土不會凝固。運送完混凝土後,通常都會用水衝洗攪拌筒內部,防止硬化的混凝土占用空間,使攪拌筒的容積越來越少。更多相關內容就來kaiyun網站http://www.skar-bnat.com谘詢了解。
The concrete mixer will always keep the mixing drum rotating during transportation to ensure that the concrete carried will not solidify. After the concrete is transported, the interior of the mixing drum is usually washed with water to prevent the hardened concrete from occupying the space and make the volume of the mixing drum less and less. For more information, please visit our website http://www.skar-bnat.com Consultation and understanding.
