The automatic concrete mixer is now widely used by us, but we have little specific knowledge about it. The following action makes the automatic concrete mixer unable to bear. Let's see what's going on.
The engine oil is an indispensable part of the diesel engine, which mainly enables the machinery to achieve lubrication, cooling, cleaning and other effects. Many automatic concrete mixer operators will check the oil volume, but we have lost a crucial step in this process!
Have you changed the deteriorated oil before? The simple action of changing oil will allow the moving parts of the engine to operate in a good lubricating environment, thus slowing down the wear between parts.
Under normal operation, the wear of oil is not large, but it is easy to produce pollution, thus losing the role of protecting machinery. During the mechanical action, a lot of dirt will enter into the engine oil. For new machines and overhauled machines, the impurities generated after the test run will also increase. If the engine oil is still injected at this time without changing the engine oil, it is easy to cause accidents such as bush burning and shaft holding.
In addition, even if the engine oil has been replaced, some operators, due to lack of maintenance experience, do not clear the oil passage when changing the engine oil, which will also allow impurities to continue to remain in the oil pan and oil path.
These are the actions that need to be noticed by the fully automatic concrete mixer before oil injection. I hope this warning can remind everyone! Come to our website for more information http://www.skar-bnat.com Consult!